Retrieving every last bit of performance from the system while stopping short of the surge line is no small feat. Dig into sizing, tower selection, chilled water loads and stability, and condenser water management to leave no efficiency stone unturned.
Finding the holy grail of centrifugal chiller optimization for all operating conditions is hard, if not impossible. This article will talk about the requirements of most chiller systems and means of control for condenser optimization.
Trends don’t always follow the expected path (or timeline), but the basics remain the basics and increased cabinet density remains inevitable. Let’s revisit the progress of liquid in data center strategy and the tenets of a future-proof(ish) hybrid design for today.
How often does an existing closed loop hot water heating or chilled water cooling system get reused as part of a building renovation project, and/or used to expand the area served by the system coverage to provide additional heating or air conditioning?
Bonomi North America is introducing a new series of NSF-Certified butterfly valves with factory-installed electric or pneumatic actuators for potable water applications with high flow requirements. The new N500 Series wafer and N501 lug body valves feature ductile iron body construction with EDPM rubber seats. They are available with stainless steel disc (N500S/N501S) or nylon-coated disc (N500N/N501N). All are approved to NSF /ANSI 61,372. Sizes range from 2 in through 12 in.
Danfoss has introduced the ICV (H)A4A control valve with flanges, the full replacement for all common flanged control valves on the market. Inspired by the ICV Flexline™ platform, the company said the ICV (H)A4A control valve’s modular design extends the lifetime of existing refrigeration installation while delivering a significant reduction in cost, energy, and servicing and maintenance times.
This chiller plant retrofit team encountered challenging existing conditions and an-swered with savvy choices for piping and valves as well as the chillers. Good communication, accurate documentation, and a creative bidding idea you might want to borrow also contributed to bringing the mechanical work in effectively and on budget.
Retrieving every last bit of performance from the system while stopping short of the surge line is no small feat. Dig into sizing, tower selection, chilled water loads and stability, and condenser water management to leave no efficiency stone unturned. Read more in April issue