Designing a new high school to be 40% more efficient than ASHRAE 90.1 – 2001 energy requirements is a feat in itself. To achieve this degree of efficiency on a very limited capital budget while designing a state-of-the-art, energy-demanding technical high school is an even greater feat.
What does a full-scale modernization on a 90-yr-old federal building and courthouse look like when it aims for federal energy goals and LEED status? Chiller plant and hot water/boiler overhauls are just the start. Aggressive lighting and water treatment/conservation strategies also contribute to the GSA’s effort to throw the book at this Alabama retrofit.
As former commercial fishermen who decided to develop their own line of organic oils, the Barlean family was no stranger to innovation. A manufacturer of nutritional lipids products based in Ferndale, WA, family-owned Barlean’s Organic Oils LLC grew so rapidly that it soon needed its own fish-oil production facility.
Energy efficiency and historic preservation are rarely synonymous. More often than not, one must be compromised for the sake of the other. Fortunately, the University of Arkansas found a way around such compromises when it came to the restoration and mechanical renovation of the school’s beloved Peabody Hall.
Protecting historical data is critical for giving an accurate view into the past and providing insights into our present. Now organizations such as the Washington State Archives are taking advantage of wireless environmental monitoring to ensure optimal storage conditions for both their paper records and digital archives.
Through a flexible design incorporating radiant heating and cooling, demand ventilation, energy recovery, and VAV, Manhattan’s Cooper Union leads its class in sustainable performance in
classrooms, labs, and beyond.
“Not enough airflow.”
These were just a few of the countless complaints that facilities managers of the Basic Medical Science Building at the University of New Mexico were receiving on a regular basis.
Last September, on what would normally have been a mild autumn day, Southern California was blasted by a record-breaking heat wave with temperatures spiraling upwards to 116°F in the Los Angeles basin. The heat was far above the normal highs, which would typically be in the mid-70s.
Retrieving every last bit of performance from the system while stopping short of the surge line is no small feat. Dig into sizing, tower selection, chilled water loads and stability, and condenser water management to leave no efficiency stone unturned. Read more in April issue