ES mobile app

Coming Soon...our new mobile app!

Public review underway for ASHRAE green buildings standard and 62.1-2007 addenda

September 25, 2009
/ Print / Reprints /
ShareMore
/ Text Size+

The 4th ISC Public Review of BSR/ASHRAE/ USGBC/IESNA Standard 189.1P, Standard for the Design of High-Performance Green Buildings Except Low-Rise Residential Buildings, is underway, taking place through November 2.This standard provides minimum criteria that apply to new buildings and major renovation projects (new portions of buildings and their systems): a building or group of buildings, including on-site energy conversion or electric-generating facilities, which utilize a single submittal for a construction permit or which are within the boundary of a contiguous area under single ownership and address sustainable sites, water use efficiency, energy efficiency, the building’s impact on the atmosphere, materials and resources, and indoor environmental quality (IEQ).

This fourth public review shows changes made to the third public review draft in response to comments received. Comments received will be discussed at the November 13-14 Interim Meeting.

Elsewhere, other addenda are in play regarding ANSI/ASHRAE Standard 62.1-2007. The proposed changes open for review in addendum r focus on the IAQ procedure, which is a performance-based approach to compliance with the standard, and allows for designers to adjust the ventilation requirements for a building or space based on performance factors which are unique to the building. These performance factors might include the use of low-emitting materials in the space or the known presence of a contaminant source.

The first public review draft of Addendum r removed a method of complying with the IAQ procedure by designing the ventilation system in the same way as an existing successful building. Based on public review comments, this approach was put back into the standard, but with new restrictions. These include a requirement that a mass-balance analysis of the building's air quality be performed in every case. This will require that the designer identify contaminants of concern for every building or space where the IAQ procedure is used, along with associated concentration or exposure limits.

The proposed addendum is open for public review through October 26. ANSI/ASHRAE Standard 62.1-2007, Ventilation for Acceptable Indoor Air Quality, sets minimum ventilation rates and other requirements for commercial and institutional buildings.

Also open for public review during the same time period is proposed addendum g, which would add information on using demand controlled ventilation systems. Coverage of DCV systems in the standard is not yet comprehensive, but this addendum provides needed clarifications on the issue.

Requirements regarding mechanical ventilation for naturally ventilated buildings are actually included in addendum n, which has completed public review and will be included in the 2010 version of Standard 62.1, which is expected to be available in spring 2010.

“Most buildings using natural ventilation in the United States are high-rise residential buildings that often have no form of outdoor air intake other than operable windows,” Roger Hedrick, Standard 62.1 committee chair, said. “This results in buildings with inadequate ventilation, because the occupants then leave the windows closed in order to run the air conditioning, keep out noise, etc. The committee felt it needed to strengthen the existing prescriptive requirements for natural ventilation to improve their corresponding IAQ benefits.”

To view a copy of the addenda open for public review, go to www.ashrae.org/publicreviews. Copies of public review drafts are only available during public review periods.

Links

You must login or register in order to post a comment.

Multimedia

Videos

Image Galleries

ES Gallery: Snapshots & Systems

Check out highlights from projects featured in our magazine this year!
3/27/14 11:00 am EST

How to Calculate Backup Power Supply Requirements for Your Facility

On-Demand This webinar reviews how to determine power requirements of facility loads; electrical characteristics and impact of different types of loads such as large motors and UPS systems on power supply sizing; acceptable power sources and other constraints applied by building codes; and how software tools can be used to simplify the process of calculating backup power requirements.  

THE MAGAZINE

Engineered Systems Magazine

ES April 2014 cover

2014 April

Check out the April 2014 issue of Engineered Systems, with features on backup power supply requirements, cyberattacks, and much more!

Table Of Contents Subscribe

Design Flaws

Following up on Howard McKew's April "Tomorrow's Environment" column: Have you ever thought twice about reporting problems with another firm's design? What did you do?
View Results Poll Archive

THE ENGINEERED SYSTEMS STORE

The_Green_Energy_Management
The Green Energy Management Book

Learn from our experts how to evaluate job opportunities, market your services, sell a Walk-through Survey, target areas for an Energy Audit, calculate energy savings, do retrofit work, and win continuing contracts for retrofit work.

More Products

Clear Seas Research

Clear Seas Research ImageWith access to over one million professionals and more than 60 industry-specific publications,Clear Seas Research offers relevant insights from those who know your industry best. Let us customize a market research solution that exceeds your marketing goals.

Tomorrow's Environment Podcast

This series from longtime columnist and chronic forward-thinker Howard McKew covers a lot of ground -- from retrocommissioning to systems training, on toward checklists for drawings and tips for meeting minutes. Click HERE to be taken to the podcast page!

STAY CONNECTED

new Facebook icon Twitter icon YouTube iconLinkedIn icon