More than ever, existing buildings are the key to future efficiency gains. And yet, better equipment isn’t everything. The knowledge and behaviors of both occupants and operations staff play critical roles, perhaps greater than you realize. An integrated team approach, smart training, and the Hawthorne Effect are but three factors contributing to your next retrofit’s ultimate fate.
While mechanical energy codes may lag relative to the efficiency targets of some other codes , the expansion of VRF into a wider range of equipment makes it easier than ever to exceed expectations. Perhaps more importantly, its incorporation into heat pumps, dehu-midifiers, compressors, and more represents more flexibility in delivering an effective retrofit without a total system overhaul.
In theory, a BAS provides all of the hardware and software required to analyze and operate all functions within a building. In reality, though, what most of these systems do best is control the HVAC system.
When it comes to cereal, the Kellogg Company has made its mark at the breakfast table. Today, as more companies strive toward sustainability, Kellogg is aiming to leave a positive mark on the environment.
Seven questions to always ask the existing boiler’s operator round up this article, written to save you time and save your client grief (and possibly money) before, during, and after the project. Pumps, pipes, asbestos, and budget are just a few areas where opportunity (or problems) await.
At Walter Reed National Military Medical Center, the mission was an air handling overhaul without interrupting the usual delivery of care. The project team delivered a safer, upgraded environment via a new desiccant system, air handlers, increased flexibility in the surgical suites, and more.
Sometimes it’s less important to think outside the box than to notice that the stuff inside the box has changed. In the case of airside economizers, more modern components and seasonal opportunities can make things work swimmingly.
Check out Engineered Systems magazine’s November 2019 issue continues the discussion of condensation on active chilled beams, examines the dynamic cooling solutions required in data center applications, the implications of USP 800 on pharmaceutical comfort, and much more.