MONTH 3- The Energy Conservation Opportunity: Process Heating for an Industrial Building Application - Solution Implementation and Monitor, Measure, and Benchmarking
Putting a new boiler in is a lot more complicated than just putting a new boiler in. You’re often taking ownership for any problem, real or potential, anywhere in the hydronics system.
Designing a commercial boiler replacement where you were not the original designer or installer might have some hidden dangers that could haunt you for years.
Last month, we tested readers on commissioning three of the many automatic temperature control (ATC) sequences of operation associated with the secondary hot water process heating system for an industrial building application.
This final three-part series for 2013 is a continuation of the July, August, and September industrial heating system application with this month’s focus on the process heating system.
MONTH 3- The Energy Conservation Opportunity: Process Heating for an Industrial Building Application - Solution Implementation and Monitor, Measure, and Benchmarking
In this tale of setpoint sleuthing, the team at Slippery Rock University digs hard into the data to discover why and where the old BAS strategy was going wrong. See what the measurements and math turned up for various spaces in terms of culprits and recommendations.
Condensing boilers, while commonly installed for heating hot water applications, often fail to deliver their inherent efficiency advantage because of deficiencies in the system design, start-up, and operation.
Death’s Door Spirits in Middleton, WI, is a popular craft distiller known for its vodka, gin, and whisky that uses organic wheat from Washington Island, Wis. The brand is sold across the United States and Europe, and according to the distillery, the beverages would not be possible without the use of two LX-100 SG steam boilers from Miura.