The Ruskin® ADC105 addressable damper controller meets NFPA 80 and 105 life safety remote damper testing requirements. The ADC105 is an addressable module that works with SIMPLEX ES fire alarm panels. With the ADC105 connected to a SIMPLEX fire alarm system, it allows continuous monitoring and alarm capability if something should go wrong. The ADC105 allows for the periodic testing that is required in NFPA 80 and NFPA 105.
To help building operators better manage their HVAC equipment, Carrier has introduced the next generation of touchscreen displays for the i-Vu® building automation system. The company says the new TruVu™ Equipment Touch (ET) displays provide facility managers and technicians with an intuitive user interface for managing HVAC equipment in buildings.
According to Det-Tronics, its SmokeWatch™ U5015 uses advanced photoelectric smoke detection technology not generally available in an explosion-proof housing. The detector is rated for Class 1 Division 1, 2, and Zone 1 environments found in industrial applications. Used with the Q5016 Duct Mount Accessory, the detector can be installed on ductwork to meet NFPA 90A requirements for AHUs of more than 2,000 cfm.
Extech Instruments has launched the new CO230 Indoor Air Quality Carbon Dioxide (CO2) monitor. Designed for use in a wide range of building applications ranging from schools to workplaces, the tabletop/wall-mount monitor can alert occupants to issues such as dizziness, headaches and fatigue resulting from inadequate ventilation by measuring and tracking carbon dioxide (PPM), temperature (°F/°C) and humidity (RH%).
Johnson Controls has released Metasys® 8.0. The company says the BAS enhancements will provide ease of use, faster troubleshooting, less time on task, and reduced risk and easier integrations. Metasys provides essential instrumentation and control to save energy, lower operational costs, and enable efficient and secure operations.
Tyco Fire Protection Products, a division of Tyco, introduced the Model RM-1 Riser Manifold. The RM-1, available for commercial and residential uses, features a proprietary connection between the manifold and the Potter alarm switch. The connection has a watertight, flat surface design which helps prevent leaks.
The new Sensaphone® Pressure Sensor is ideal for measuring and detecting loss of boiler pressure in hot water systems at large facilities including hotels, schools, hospitals, universities, and housing communities.
The WSG30™ system from Sensaphone® provides 24/7 remote monitoring of HVAC units, refrigerators, and freezers. It is ideal for locations where hard-wiring sensors are difficult or cost prohibitive. The WSG30 system is a web-based monitoring system that uses wireless sensors to detect problems such as temperature changes (from -109°F to 115°F), humidity fluctuations, water leaks, and power outages. A single WSG30 unit can support up to 30 wireless sensors.
Check out Engineered Systems magazine’s October 2019 issue takes a closer look at condensation concerns surrounding the use of chilled beams, examines the energy implications of chilled water plant design and operation, and much more.